Radium 6AN ORB Swivel Banjo to 6AN Male Fitting
$34.99
RAD20-1000-0606
Fabrication
Fittings
Radium Engineering Products
This low profile swiveling fitting screws into a 6AN ORB port and has a 6AN male at 90 degree angle. Safe for use with...
Radium 4AN ORB Swivel Banjo to 8.5mm Barb
$34.99
RAD20-1000-0485
Fabrication
Fittings
Radium Engineering Products
Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.
Radium 4AN ORB Swivel Banjo to 6.5mm Barb
$34.99
RAD20-1000-0465
Fabrication
Fittings
Radium Engineering Products
Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.
Radium 4AN ORB Swivel Banjo to 6AN Male
$34.99
RAD20-1000-0406
Fabrication
Fittings
Radium Engineering Products
Stainless steel and aluminum construction. Swivels 360 degrees after installation. Compatible with most fluids.
Radium Engineering Mitsubishi Evo X Fuel Hanger Feed Kit - Microglass Filter
$379.95
$361.99
RAD20-0946-05
Brackets
Fabrication
Radium Engineering Products
High flow feed kit from fuel tank to engine bay using PTFE hoses and Radium in-line fuel filter. Hoses pre-made to length and special...
Radium Engineering DSV 12AN ORB To 12AN Male High Fill
$54.95
$53.99
RAD20-0935
Fabrication
Fittings
Radium Engineering Products
Fuel cell vent valve will roll-over protection. 12AN Male hose connection.
Radium Submersible Fuel Tubing 5/16in x 8.2in
$19.99
RAD20-0875
Fabrication
Hoses
Radium Engineering Products
PTFE submersible fuel tubing. 5/16" inside diameter, 8.2" overall length.
Radium RB26DETT Valve Cover Intake and Exhaust 12AN Male Press-Fit Fitting
$59.95
$57.99
RAD20-0809
Fabrication
Fittings
Radium Engineering Products
Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.
Radium Engineering V2 Quick Connect 19mm Male to 10AN Male Straight
$39.95
$38.99
RAD20-0758
Fabrication
Fittings
Radium Engineering Products
Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.
Radium Engineering Distribution Block 12-10-10-10 With Fittings
$69.95
$67.99
RAD20-0737
Fabrication
Fittings
Radium Engineering Products
High flow distribution block designed to work with large -10AN and -12AN lines. Can combine three lines into one. Safe for use with alternative...
Radium 8AN ORB to 6AN ORB Swivel Union Fitting
$29.99
RAD20-0686
Fabrication
Fittings
Radium Engineering Products
Replacement fitting for Radium Engineering Direct Mount Regulators (Gen 2 design).
Radium Engineering 10AN Male Swivel Banjo 17.5mm Press Fit
$59.95
$57.99
RAD20-0609
Fabrication
Fittings
Radium Engineering Products
Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.
Radium Dry Break Dust Cap
$39.95
$38.99
RAD20-0604
Fabrication
Filler Necks
Radium Engineering Products
For use with Radium dry-break fuel cell fill receivers. Includes lanyard
Radium Engineering 3/8in SAE Female to 6AN Male Low Profile Elbow
$29.99
RAD20-0601
Fabrication
Fittings
Radium Engineering Products
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile Elbow
$29.99
RAD20-0600
Fabrication
Fittings
Radium Engineering Products
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Radium Engineering 10AN ORB to .75in Barb Roll Over Valve
$24.99
RAD20-0594
Fabrication
Fittings
Radium Engineering Products
Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an...
Radium PCV Valve 10AN ORB to 6AN Male
$39.95
$38.99
RAD20-0561
Fabrication
Fuel Lines
Radium Engineering Products
This CNC machined aluminum PCV valve can install to a 10AN ORB female port and allows connection of a 6AN hose. The valve contains...
Radium Engineering Nissan R-35 GT-R Fuel Line Retaining Kit
$139.95
$133.99
RAD20-0560
Brackets
Fabrication
Radium Engineering Products
Set of 5 brackets. Attach to locations on the underside of the Nissan R35 GT-R to hold fuel lines and/or battery cables or other...
Radium Engineering Fuel Cap Remote Mount Vented
$39.95
$38.99
RAD20-0548-V
Fabrication
Fuel Lines
Radium Engineering Products
Replacement fuel cap only. For use with Radium fender mounted fill flange. Includes O-ring.
Radium Engineering Universal Check Valve Kit 10AN
$59.95
$57.99
RAD20-0534-10
Fabrication
Fittings
Radium Engineering Products
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Radium Engineering Universal Check Valve Kit 6AN
$59.95
$57.99
RAD20-0534-06
Fabrication
Fittings
Radium Engineering Products
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Radium Remote Mount Fill Neck - Straight - 1.5in Barb
$79.95
$76.99
RAD20-0527
Fabrication
Filler Necks
Radium Engineering Products
Straight fill neck for 1.5" ID fill hose. 6-bolt flange. For use on Radium Fuel Cell Surge Tank systems. Integrated check valve flapper. Not...
Radium Engineering 08-21 Subaru Fuel Line Retaining Kit
$99.95
$95.99
RAD20-0526
Brackets
Fabrication
Radium Engineering Products
Bolts to underside of car to support aftermarket fuel lines. Same as brackets used in Radium fuel plumbing kit 20-0529-0X.
Radium Engineering 10AN Male Swivel Banjo - 11.8MM Press Fit Fitting
$59.95
$57.99
RAD20-0509
Fabrication
Fittings
Radium Engineering Products
Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.
Radium Engineering Fuel Cell Vent Kit - 12AN
$59.95
$57.99
RAD20-0484-12
Fabrication
Fuel Lines
Radium Engineering Products
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering Fuel Cell Vent Kit - 8AN
$59.95
$57.99
RAD20-0484-08
Fabrication
Fuel Lines
Radium Engineering Products
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Mitsubishi EVO X Fuel Tank Pressure Plug
$19.99
RAD20-0421
Fabrication
Fittings
Radium Engineering Products
For use with the Radium Engineeing Evo X fuel pump hanger. This small part plugs the hole for the fuel tank pressure sensor. In...
Radium Engineering Hose Separator Clamp - 2 Way
$15.99
RAD20-0417
Clamps
Fabrication
Radium Engineering Products
CNC machined aluminum. For 0.39 diameter tube. M6 screw included.
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long
$19.99
RAD20-0395
Fabrication
Hoses
Radium Engineering Products
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long
Radium Engineering Filler Neck Block-Off Kit
$34.99
RAD20-0360
Fabrication
Filler Necks
Radium Engineering Products
Radium Engineering Filler Neck Block-Off Kit
Radium Engineering 2013+ Subaru BRZ / Scion FR-S ECU Mount Kit
$49.95
$48.99
RAD20-0352
Brackets
Fabrication
Radium Engineering Products
ZN6 Products
Radium Engineering 2013+ Subaru BRZ / Scion FR-S ECU Mount KitThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2017 Subaru BRZ...
Radium Engineering Fuel Filter Mount and Filter Clamp EVO X
$89.95
$86.99
RAD20-0310
Brackets
Fabrication
Radium Engineering Products
Radium Engineering Fuel Filter Mount and Filter Clamp EVO XThis Part Fits: Year Make Model Submodel 2015 Mitsubishi Lancer Evolution Final Edition 2008,2010-2015 Mitsubishi...
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile
$24.99
RAD20-0290
Fabrication
Fittings
Radium Engineering Products
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile
Radium Engineering 3 Into 1 Distribution Block w/ Fittings
$89.95
$86.99
RAD20-0237
Fabrication
Fittings
Radium Engineering Products
Radium Engineering 3 Into 1 Distribution Block w/ Fittings
Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo
$49.95
$48.99
RAD20-0218
Clamps
Fabrication
Radium Engineering Products
Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 12.8in Long
$19.99
RAD20-0195
Fabrication
Hoses
Radium Engineering Products
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 12.8in Long